QTD4522 Luffing Jib Tower Crane Trolly 45m Luffing Boom Tower Crane 2.2ton Tip Load 160m Attaching Height
Main products of HYCM Tower CraneS are as followings:
QTZ series topkit tower crane (max. load from 2.5t to 25t);
QTP series topless tower crane (max. load from 4t to 32t);
QTD series luffing tower crane (max. load from 6t to 25t);
WD series derrick crane (max. load from 3t to 16t);
SC100, SC150, SC200, SC100/100, SC150/150, SC200/200 construction hoist;
ZLP series suspended platform (rated load 250-1000kg).
Some reasons for using a luffing jib tower crane, instead of other types of tower crane:
1> This kind of crane is frequently the best solution when several cranes are working on the same site, avoiding any kind of crash with other cranes or the sorrounding buildings. With their variable working radius, they don’t interfere in the working area of the other cranes on site and they can be parked with a very reduced radius.
2> And luffing jib tower cranes can improve material handling cycles in the jobsite, using them like auxiliry cranes to the pricinpal tower cranes, reducing the construction time.
3> Normally, the maximun load bigger than a tower crane’s.
4> In some places, local laws make luffing jib tower cranes necessary. For example, some places don’t allow any crane to fly over the sorrounding spaces when they are working in a jobsite, and luffing jib-cranes are very demanded because you can move the jib fron the horizontal position up to the total vertical position.
Specifications for QTD4522 Luffing Jib Tower Crane Trolly 45m Luffing Boom Tower Crane 2.2ton Tip Load 160m Attaching Height
Main Performance |
Main Specifications |
Rated lifting moment (KN.m) |
1200 |
Max. lifting load(t) |
6 |
Tip load(t) |
2.2 |
Working range(m) |
5~45 |
Lifting height(m) |
Freestanding height |
37.5 |
Attaching height |
160 |
Mast section |
Main limb (mm) |
∠180X180X18/ Q345B |
Section size(mm) |
1600X1600X3000 |
Lifting jib |
Upper chord(mm) |
70X6 Square tube/ Q345B |
Lower chord(mm) |
70X6 Square tube/ Q345B |
Counter jib |
Length(mm) |
7500 |
Hoisting mechanism |
Reducer |
26IQ15 |
Motor |
YZTPE180L2-4-26/KW |
Brake |
YWZ-250/45 |
Wire rope |
6X37-12-1770-Ⅰright lay |
Hoisting speed (m/min) |
0-80 0-40 |
Slewing mechanism |
Reducer |
HL95.100.195 |
Motor |
YTW132S-4B5-5.5KW |
Slewing speed (r/min) |
0-0.6 |
Trolleying mechanism |
Reducer |
25TLB20 |
Motor |
YZTPF200M-4-25KW |
Trolleying speed( m/min) |
0-10 |
Jacking-up speed |
Hydraulic pump station
Jacking oil cylinder
|
TQZ125/160/125 |
Motor |
7.5KW |
Slewing bearing |
Type |
1400.45 |
Pre-sales Service for QTD4522 Luffing Jib Tower Crane Trolly 45m Luffing Boom Tower Crane 2.2ton Tip Load 160m Attaching Height
-
More than 90% of the timely response rate;
-
Timely response to customer questions;
-
Provide professional product solutions;
-
Inquiry and consulting support;
-
Technical support;
-
View our factory.
After-sales Service for QTD4522 Luffing Jib Tower Crane Trolly 45m Luffing Boom Tower Crane 2.2ton Tip Load 160m Attaching Height
- Provice edited videos of the whole process of operation and maintenance;
- Provide paper or electronic operation and maintenance instructions;
- Localized service outlets guarantee;
- housekeepers respond quickly;
- Factory-specific equipment.
Photos for QTD4522 Luffing Jib Tower Crane Trolly 45m Luffing Boom Tower Crane 2.2ton Tip Load 160m Attaching Height