8 ton 60m Jib Hammerhead Tower Crane Overhead Construction Equipment QTZ6010
Company information for 8 ton 60m Jib Hammerhead Tower Crane Overhead Construction Equipment QTZ6010
1. A professional manufacturer and exporter of tower crane & construction hoist & derrick crane & suspended platform since 2002;
2. Preferential ex-factory price, excellent product quality and good after-sales service are our pursuit;
3. Our products had been exported to more than 30 countries, such as Korea, Mexico, Vietnam, Philippines, Indonesia, India, Sri Lanka, Cambodia, Russia, Kazakhstan, Brazil, Cyprus, Belgium and Algeria etc.
Services for 8 ton 60m Jib Hammerhead Tower Crane Overhead Construction Equipment QTZ6010
1. Installation, debugging, operators trainning;
2. Maintanence;
A. when trainning your operators, our engineers will give them advice on how to operate the machines correctly;
B. we will send you the operation manual which can help you operate the machins properly, it can also help you to solve the common problems;
C. Call us at any time if you have problems about our tower crane;
D. If needed, we will send engineers to your site to solve your problems;
2. Providing some documents for your customs clearance, like commercial invoice, packing list, certificate of origin etc;
3. Spare parts supply.
Specifications for 8 ton 60m Jib Hammerhead Tower Crane Overhead Construction Equipment QTZ6010
| Main Performance |
Main Specifications |
| Rated lifting moment (KN.m) |
800 |
| Max. lifting load(t) |
8 |
| Tip load(t) |
1.0 |
| Working range(m) |
60 |
| Lifting height(m) |
Freestanding height |
45 |
| Attaching height |
150 |
| Mast section |
Main limb (mm) |
135X12 two angle steel/ Q345B |
| Section size(mm) |
1835X1835X2500 |
| Lifting jib |
Upper chord(mm) |
Ø89X8 / 20# |
| Lower chord(mm) |
∠90X8 two angle steel / Q345B |
| Parallel face width (mm) |
1360 |
| Counter jib |
Main limb(mm) |
［32b/ Q235B |
| Length(m) |
12.636 |
| Hoisting mechanism |
Reducer |
30TQ20 |
| Motor |
YZRD225-4/8-30/30KW |
| Brake |
YWZ-315/45 |
| Wire rope |
6X37-16-1770-1-1right lay |
| Hoisting speed (m/min) |
80/40 40/20 |
| Slewing mechanism |
Reducer |
XX100,195 |
| Motor |
YZR132-6-3.7KW |
| Coupler |
YOX280A |
| Slewing speed (r/min) |
0.6 |
| Trolleying mechanism |
Reducer |
XX120 |
| Motor |
YD132S-4/8-3.3/2.2KW |
| Trolleying speed( m/min) |
40/20 |
| Jacking-up speed |
Hydraulic pump station
Jacking oil cylinder
|
TQZ80/160/125 |
| Motor |
Y132M-4-5.5 |
| Slewing bearing |
Type |
1250.45 |
Photos for 8 ton 60m Jib Hammerhead Tower Crane Overhead Construction Equipment QTZ6010
